Dripper system-manufacture,factory,supplier from China

(Total 24 Products for Dripper system)

Adjustable Emitter

The red adjustable flow dripper can also be called the 8-hole red little red cap dripper. The 8-hole red little red cap dripper can be adjusted to sprinkle, drip, and close. Adjust to the left to close, adjust to the right to adjust the water flow. The water outlet distance is determined according to the water supply pressure.

اتصل الآن

4L Emitter

Drip irrigation dripper characteristics1. Silicone sheet inside the dripper can change the section of the water outlet, realize the effect of stable water flow and flow regulation. It can be installed on fruit trees, saplings and forest trees with a relatively long distance, and the distance between the drippers can be adjusted arbitrarily according to the distance between crops. Suitable for various terrains such as plains, mountains, plateaus, terraces, hills, etc.2. The dripper has a small volume, so it is easy to install.

اتصل الآن

10L Current Stabilizer

Performance characteristics:When the system pressure changes in the range of 0.05-0.35Mpa, the outflow remains unchanged, and the uniformity of irrigation can reach more than 98%; For larger trees, annular drip irrigation pipes should be installed at the outlet of the current stabilizer to ensure that the trees can be irrigated all around; the bidirectional anti-clogging design of the shunt pipe can ensure the long-term stable movement of the equipment undergroundSteady flow - small pipe outflow irrigationPressure range: 0.05-0.4Mpe; Flow specification: 10L/:20L/h.

اتصل الآن

Drip irrigation

Drip irrigation : The inlaid drip irrigation pipe is an integrated drip irrigation pipe with a cylindrical dripper embedded on the inner wall of the pipe. The dripper is assembled on the inner wall of the pipe while producing the pipe, which is easy to install and use.Classification1. According to the water outlet method, it is divided into:Pressure Compensated Drip Irrigation Pipes and Non-Pressure Compensated Drip Irrigation Pipes2. According to the structure can be divided into:In-line drip irrigation pipe and inter-pipe drip irrigation pipeapplicationApplicable conditions:1.

اتصل الآن

4L Pressure Compensation Emitter

Pressure compensation range: 0.08-0.4MPa, emitter specification and flow: 4L/h, 8L/hPerformance characteristics:When the system pressure changes from 0.08 to 0.35Mpa, the flow of the emitter remains unchanged, and the uniformity of irrigation can reach more than 98%.Features of use:The installation on the construction site is suitable for any spacing of crops. PE water pipe can be buried below the ground.

اتصل الآن

Drip irrigation tape

The drip irrigation belt uses a plastic pipe (drip irrigation pipe lead) to send water through the orifice or dripper on the capillary tube with a diameter of about 10mm to the root of the crop for local irrigation. It is a dripper or drip irrigation belt with a very small outlet orifice, which drips water evenly and slowly into the soil near the roots of the crops.1. The built-in dripper has its own filter window, which has good anti-blocking performance.2. Turbulent flow channel design. Water evenly.3. The dripper and pipeline have strong integrity,4.

اتصل الآن

7-hole Adjustable Emitter

Suitable occasions: suitable for various terrain and crops, especially in irrigation area with large slope fluctuation; Suitable for the case where the laying length of drip irrigation pipe is large; Suitable for the emitter spacing changes; When the system pressure is unstable.

اتصل الآن

8L Pressure Compensated Emitter

اتصل الآن

Y-type 63 Net Filter

The net filter is a kind of precision equipment which uses the filter screen to directly intercept impurities in water and oil and other liquids, removes suspended matter and particles in water and oil , reduces turbidity, purifies water quality and oil quality, reduces the generation of system dirt, bacteria, algae and rust, etc., so as to purify water quality, oil quality and protect other equipment in the system.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

اتصل الآن

20L Current Stabilizer

اتصل الآن

Y-type 50 Net Filter

اتصل الآن

16 Soft Tape Three-way

Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.

اتصل الآن

20 Simple Straight Through Valve

PE socket straight through valve is widely used in agricultural water-saving irrigation project. For example, small pipe outflow project and drip irrigation system (drip irrigation pipe), some projects that use PE pipes, and PEΦ16 or 20 capillary drip irrigation systems, etc.Through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.

اتصل الآن

Single Channel Fertilizer Applicator

Functional features:Communication mode of solenoid valve: WBUS (2-wire system, no polarity, 3km)HMI: 12.1"touch screen displayMultiple irrigation areas: maximum 120, single area irrigation time in irrigation area: 4 stagesIt can be irrigated at regular time and quantitatively, or the irrigation can be set up according to temperature and solar radiation4 start times can be set for each irrigation area every day4 filter backwash (4 dry contacts) can be controlled at regular timeEmergency irrigation: one-key irrigation function (emergency irrigation)Temporary stop: one-key sto

اتصل الآن

16 Pull Ring Soft Tape Three-way

Purpose: the drip irrigation system uses the product when the tape is the main pipe. Branch water source, the main pipeline (soft tape) is connected with drip irrigation tape, so that the water in the main pipeline (soft tape) flows into the drip irrigation tape respectively.Usage: use a puncher (14mm in diameter) to make a hole on the side of the soft water tape, and then rotate the three-way into the soft tape hole, tighten the nut to fix the bypass on the soft water tape, and connect the drip irrigation tape on the other sideParameters:Model:16mmMaterial: PE plastic

اتصل الآن

16 Reversed Lock-nut Bypass

There are two types of drip irrigation tape lock-nut bypass produced by our factory, one is 12-16mm reversed lock bus bypass, the other is 16-16mm reversed lock-nut bypass. Generally, users call this kind of reversed lock-nut bypass as drip irrigation tape lock-nut bypass. 16-16mm lock-nut bypass is also called large hole lock-nut bypass or large body lock-nut bypass. Because both ends are 16mm diameter, this large hole lock-nut bypass is a kind of bypass that is more commonly used in lock-nut pipe fittings.

اتصل الآن

One-out Two Drip Arrows

Set combination Multiple combinations can meet your various needsAOne-outlet two small straight drip arrow + single hook One 4/7 to 3/5 single hookOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsBOne-outlet two small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsCOne-outlet two big straight drip arrow + single hook One 4/7 to 3/5 single hookOne 3/5 three-way

اتصل الآن

16 Pull Ring Soft Tape Bypass

Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.

اتصل الآن

Y-type 40 Laminated Filter

Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.

اتصل الآن

T-type 75 Net Filter

Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

اتصل الآن

PE Pipe 40

Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life. Anti-solarization, anti-aging, durability, high gloss, high quality, good corrosion resistance.Good toughness, strong adaptability to terrain, easy laying, long service life, more than 8 years naked on the ground. The connection is convenient, and there are special fast connection fittings.

اتصل الآن

16 Simple Bypass Valve

Product introduction: the pull ring bypass switch is a common drip irrigation switch, one end of which is connected with the main water tape or PE pipe, and the other end is connected with the drip irrigation tape, so as to achieve the effect of controlling the water flow in the rear section of the valve.Instructions for use: it is mainly used for controlling the head end of the capillary (the right end of the pull ring is connected with a 16mm drip irrigation tape, which is fixed by the pull ring; The left end is connected with main water delivery pipe, which can be used for PE pipe (wal

اتصل الآن

Ground-inserting Micro-spray Cross Atomization

Performance characteristics:The spraying water drop is very small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.22-0.28flow (Lh) 24-33spraying radius (m)1.0-1.5

اتصل الآن

Upside Down Micro-spray And Rotary Micro-spray

Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.2550,60,703-4

اتصل الآن

Relate News

Indispensable Dripper in Drip Irrigation System

Drip irrigation drippers are generally made of low-pressure polyethylene. The pressure water flow in the capillary passes through the narrow and narrow channel in the dripper, so that after the energy is consumed, it drips into the soil drop by drop and evenly with a constant and uniform amount of water. Under the gravity of the droplet and the action of the capillary in the soil, it gradually wets soil. Drippers are widely used in irrigation fields such as orchards, greenhouses, greenhouses, gardening, and greening.

Choosing A Emitter, These 5 Elements are Very Important

When choosing a dripper, pay more attention to the flow rate, working pressure and scope of the dripper. The selection of these parameters should rely on a reasonable irrigation system, comprehensive crops, planting patterns, and soil quality.So for the dripper itself, we should also consider the following aspects when choosing:1. The manufacturing accuracy of the dripper. The uniformity of drip irrigation is closely related to the accuracy of the dripper. In many cases, the flow change caused by the manufacturing deviation of the dripper exceeds the flow change caused by hydraulics.

How to Choose a Pressure Compensation Dripper?

Compared with the dripper, the most obvious feature of the pressure-compensated dripper is:1. The pressure compensation dripper can make the elastic silicone sheet change the section of the water outlet with the help of water conservancy pressure, automatically adjust the flow rate, and make the water output uniform;2. The pressure compensation performance is strong, and the automatic control water dispenser is the best choice. It is especially suitable for undulating terrain, unbalanced system pressure and need to increase capillary.How to choose a pressure compensation dripper?1.

An Automated Single-Pipe Irrigation System

Gated irrigation pipe may be used for each water conveyance and water distribution. whilst a single gated pipeline is used for a number of irrigation sets, one institution of gates should be closed and every other organization opened at each irrigation set trade. this calls for great exertions which may be reduced via automating the machine.maximum automatic gated pipe systems use a separate deliver pipeline for conveyance.

What to Consider When Buying a Drip Irrigation System

Now which you’re familiar with the distinctive styles of systems and emitters, you may recognition on developing your lawn’s perfect device. the dimensions and kind of garden, in conjunction with the kind of soil and other elements, are well worth noting and making plans for. here are some factors to keep in mind when shopping for a drip irrigation system.Garden SizeThe size of your garden will determine your system’s setup and the kit that you need. For smaller gardens, a single kit is often enough to install an effective drip irrigation system.

How to use water and fertilizer integration

1. Establish a drip irrigation system first. The length and depth of the pipeline system should be designed according to basic conditions such as topography, soil texture, crop planting conditions, and water sources. So that the integration of water and fertilizer can play the greatest efficiency.2. The fertilization system should be designed for quantitative fertilization in the field, including the location, capacity, outlet, fertilization pipeline, distributor valve, water pump and fertilizer pump of the reservoir and fertilizer pool.3.

Characteristics of garden drip irrigation pipes

Drip irrigation pipe is an important irrigator in drip irrigation system. According to the water demand of plants, through the low-pressure pipeline system and the irrigator installed on the capillary, the water and the nutrients required by the plants are dripped into the plants evenly and slowly. in the root zone soil.In particular, most of the landscaping plants are laid with a special drip irrigation pipe, and the drip irrigation pipe includes a pipe body and drip holes evenly distributed on the pipe body.

Best Drip Irrigation System

Drip irrigation is a watering gadget that gives you low-pressure, low-quantity water through manner of slow-dripping water, a stream, or a spray. The water emitted from a drip irrigation gadget is carried out at once to the roots of a plant so they stay constantly moist, but aren't soaked. This sort of irrigation gives many advantages over general sprinklers or hose watering.Below, you’ll find a collection of reviews for the best irrigation systems.

Advantages of drip irrigation

1. The effective utilization rate of water is high. Under the condition of drip irrigation, the irrigation water wets part of the soil surface, which can effectively reduce the ineffective evaporation of soil water. At the same time, because drip irrigation only moistens the soil near the roots of the crops, and the soil moisture content in other areas is low, it can prevent the growth of weeds. Third, the drip irrigation system does not generate ground runoff, and it is easy to grasp the precise watering depth, which is very water-saving.2.

What Should Consider

Pressure CompensationThe amount of pressure that flows through a drip irrigation system can fluctuate, depending on hose length and garden bed elevation, among other factors. This can cause emitters to flow differently than designed, with more or less water flow depending on pressure.To combat this, the best drip irrigation system emitters are pressure compensating by design. They’ll emit the same amount of water regardless of the pressure at their inlet (where they attach to the main hose).

Introduction of Micro-spray Sprinklers

Micro-spray TapeMicro-spray Tape are useful devices which can make the most of a low-pressure drip irrigation system. They install along taller vegetation or are used to hit a few flora with extra water needs whilst leaving much less-needy plant life by myself. They’re designed with progressed spray-range over other emitter-kinds with the identical strain.

How to Choose The Irrigation Pipe

You may be able to do just that while you design your irrigation system if you choose large pipelines than conventional methods of sizing might advocate. pipe sizes are generally selected to maintain the friction lack of the flowing water beneath a few specific fee. a larger pipe has less friction loss and, consequently, a reduced power demand for pumping. on account that power expenses had been rising even faster than the general inflation rate, yearly electricity expenses will boom whilst capital fees usually stay steady.